Fluid Conversions

Example Code

# Example Code
from ogPypeline import fluid as flu

converted_fluid_yield_point  = flu.fluid_yield_point(2.1, 'deg/100ft')
print(converted_fluid_yield_point)
# outputs the following dictionary:
{
    'dyne/cm2': 67.0600854,
    'kPa': 6.7032378,
    'Mpa': 0.0067031999999999994,
    'lbf/100ft2': 14
}
# Each key representing a different fluid yield point unit
print(converted_fluid_yield_point['dyne/cm2'])
# outputs the following float:
67.0600854

Fluid Consistency units

The fluid_consistency(value, units) function converts between different Fluid Consistency units. The input units are as per the table below:

Fluid Consistency units
Unit Description	Function Input String
dyne-s^n/cm2	‘dyne-s^n/cm2’
eq.cp	‘eq.cp’
lbf-s^n/100ft2	‘lbf-s^n/100ft2’
lbf-s^n/ft2	‘lbf-s^n/ft2’
Pa-s^n	‘Pa-s^n’

Fluid Yield Point units

The fluid_yield_point(value, units) function converts between different Fluid Yield Point units. The input units are as per the table below:

Fluid Yield Point units
Unit Description	Function Input String
Dyne per Square Centimeter	‘dyne/cm2’
KiloPascal	‘kPa’
MegaPascal	‘Mpa’
Pound Force per Hundred Square Feet	‘lbf/100ft2’

Liquid Production Rate units

The liquid_production_rates(value, units) function converts between different Liquid Production Rate units. The input units are as per the table below:

Viscosity units

The viscosity(value, units) function converts between different Viscosity units. The input units are as per the table below:

Viscosity units
Unit Description	Function Input String
Centipoise	‘cp’
Gram per Centimeter Second	‘g/(cm.s)’
Kilogram per Meter Hour	‘kg/(m.hr)’
Kilogram per Meter Second	‘kg/(m.s)’
Kilogram-force Second per Square Meter	‘kg-f.s/m2’
KiloPascal Second	‘kPa-s’
Newton Second per Square Meter	‘N.s/m2’
Pascal Second	‘Pa-s’
Poise	‘p’
Dyne Second per Square Centimeter	‘dyne-s/cm2’
Pound Force-Second per Square Foot	‘lbf-s/ft2’
Pound Force-Second per Square Inch	‘lbf-s/in2’
Pound per Foot Hour	‘lb/(ft.hr)’
Pound per Foot Second	‘lb/(ft.s)’
Poundal Second per Square Foot	‘poundal.s/ft2’
Reyn	‘reyn’

Oil Volume units

The oil_volume(value, units) function converts between different Oil Volume units. The input units are as per the table below:

Oil Volume units
Unit Description	Function Input String
Barrel	‘bbl’
Barrel of Oil Equivalent	‘BOE’
US Gallons	‘gal’
Kiloliters	‘kL’
Millions of Barrels of Oil Equivalent	‘MMBOE’
Thousands of Barrels of Oil Equivalent	‘KBOE’
Tonnes of Oil Equivalent	‘toe’

Surface Tension units

The surface_tension(value, units) function converts between different Surface Tension units. The input units are as per the table below:

Surface Tension units
Unit Description	Function Input String
Newton/Meter	‘N/m’
Millinewton/Meter	‘mN/m’
Gram-Force/Centimeter	‘gf/cm’
Dyne/Centimeter	‘dyn/cm’
Erg per Square Centimeter	‘erg/cm2’
Erg per Square Millimeter	‘erg/mm2’
Poundal per Inch	‘pdl/in’
Pound-Force per Inch	‘lbf/ft’